29 janvier 2020.
Fujifilm vient de publier les mises à jour des versions de firmware pour les boitiers X-Pro3 et le X-T3
X-Pro3 Camera Body Firmware Update
Ver.1.03https://www.fujifilm.com/support/digital_cameras/software/firmware/x/xpro3/index.htmlDetail of the update
The firmware update Ver.1.03 from Ver.1.01 and Ver.1.02 incorporates the following issues:
1. The phenomenon is fixed that in rare cases, a freeze could occur.
2. The phenomenon is fixed that the color tone of recorded images is not recorded correctly in AF-C mode and continuous shooting.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
X-T3 Camera Body Firmware Update
Ver.3.20https://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt3/index.htmlDetail of the update
The firmware update Ver.3.20 from Ver.3.10 incorporates the following issues:
1. Enhanced autofocus.
* Improving the tracking performance of the eye AF frame, making it easier to attain accurate autofocus on the eyes.
* Improving face-detection performance when there are faces of different sizes within the same frame, making it easier to attain accurate autofocus.
* Improving autofocus capability on a foreground subject even when there is a mixture of foreground and background subjects within a AF frame, causing the foreground subject to go out of focus, e.g. when shooting flowers against a busy background.
2. Capability to save up to 9,999 pictures in each folder.
Until now, the number of pictures that can be saved in a folder on an SD card was limited to 999. This update will raise the limit by ten times to 9,999 pictures.
3. The phenomena below during a movie shooting are fixed.
* Focus hunting at the minimum aperture.
* A black line can sometimes appear on the bottom of the center.
4. Fix of minor bugs.