Publicité

Bonjour,

Fujifilm vient de publier des nouvelles Mise à jour du Firmware le 21 mars 2017 pour les boitiers X-T1 , X-T2 , et X-Pro2.
Fujifilm a également publié une nouvelle mise à jour pour le Flash EF-X500.

 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

X-T1 Camera Body Firmware Update Ver.5.10
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt1/index.html

Detail of the update

The firmware update Ver.5.10 from Ver.5.01 incorporates the following issues:

    1. Accessory option is added in firmware upgrade function. With this upgrade, firmware of accessory like Shoe Mount Flash can be upgraded with the camera.

    <Important notice for Shoe Mount Flash EF-X500 owners>
    The firmware for the EF-X500 is upgraded.
    The serial numbers of the flashes which requires this firmware update can be checked in the searching form from the link below .
    Update the firmware for X-T1,X-T2 or X-Pro2 first, then upgrade the firmware for EF-X500.
        FUJIFILM to release latest firmware updates for EF-X500
        Shoe Mount Flash EF-X500 FirmwareUpdate Ver.1.02

 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

X-T2 Camera Body Firmware Update Ver.1.20
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt2/index.html

Detail of the update

The firmware update Ver.1.20 from Ver.1.10 incorporates the following issues:

    1. Accessory option is added in firmware upgrade function. With this upgrade, firmware of accessory like Shoe Mount Flash can be upgraded with the camera.

    <Important notice for Shoe Mount Flash EF-X500 owners>
    The firmware for the EF-X500 is upgraded.
    The serial numbers of the flashes which requires this firmware update can be checked in the searching form from the link below .
    Update the firmware for X-T1,X-T2 or X-Pro2 first, then upgrade the firmware for EF-X500.

 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

X-Pro2 Camera Body Firmware Update Ver.2.10
http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xpro2/index.html
Detail of the update
The firmware update Ver.2.10 from Ver.2.01 incorporates the following issues:
•   1. Accessory option is added in firmware upgrade function. With this upgrade, firmware of accessory like Shoe Mount Flash can be upgraded with the camera.

<Important notice for Shoe Mount Flash EF-X500 owners>
The firmware for the EF-X500 is upgraded.
The serial numbers of the flashes which requires this firmware update can be checked in the searching form from the link below .
Update the firmware for X-T1,X-T2 or X-Pro2 first, then upgrade the firmware for EF-X500.


 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Fujifilm a également publié une mise à jour du Flash EF-X500

Shoe Mount Flash EF-X500 FirmwareUpdate Ver.1.02
http://www.fujifilm.com/support/digital_cameras/accessories/software/efx500/index.html

The firmware update Ver. 1.02 from Ver.1.00 incorporates the following issues:

    1. We identified the phenomena below, which could arise in rare instances when certain EF-X500 units are in stand-by mode and when a communication error occurs between the camera and this flash unit.

    The phenomena below could occur in the aforementioned instances:
    1. The applicable EF-X500 flash unit does not properly respond to turn on from stand-by mode.
    2. The alkaline batteries may become increasingly hot. If you try to take the batteries out of the EF-X500 flash unit without turning the flash off and/or disconnecting the flash unit from the camera and letting the batteries cool down, a skin burn could occur.

    A firmware update is now available to address and prevent this potential occurrence in relevant EF-X500 units.

    The serial numbers of the flashes which requires this firmware update can be checked in the searching form from the link below .
        FUJIFILM to release latest firmware updates for EF-X500

    <How to upgrade the firmware>
    ・For EF-X500 owners who have X-T1, X-T2 or X-Pro2.
    Update the firmware for X-T1,X-T2 or X-Pro2 first, then upgrade the firmware for EF-X500.
        X-Pro2 Camera Body Firmware Update Ver.2.10
        X-T1 Camera Body Firmware Update Ver.5.10
        X-T2 Camera Body Firmware Update Ver.1.20

    ・For EF-X500 owners who do not have the X-T1, X-T2 nor X-Pro2
    Please contact your local FUJIFILM support center.
        Contact Us
« Modifié: 21 mars, 2017, 10:33:08 am par christal2 »

Publicité

Récapitulatif pour tous les boitiers Fujifilm ->  http://forum.nikonpassion.com/index.php?topic=110483.0
( Les versions les plus récentes de firmware par boitier Fujifilm X    MAJ au 21 03 2017 )
« Modifié: 21 mars, 2017, 10:38:36 am par christal2 »

La mise a jour du 21 mars 2017 est principalement destinée à résoudre deux problèmes qui peuvent se produire avec l'utilisation de certains Flash EF-X500.

- Certains phénomènes pouvaient se produire, dans de rares cas, lorsque le flash EF-X500 est en mode veille.
- Les piles alcalines peuvent devenir de plus en plus chaudes.
 
Le formulaire à l'adresse indiquée, permet de savoir , si votre flash est concerné par la mise à jour.
Il suffit de saisir son numéro de série dans ce formulaire :

Input the serial number of the EF-X500 and search.

http://www.fujifilm.com/news/n170308.html

Si le numéro de série n'est pas concerné, votre flash ne nécessite pas de mise à jour. (et par conséquent votre boitier non plus, sauf si la MAJ contient des corrections de micro-bug qui ne seraient pas signalées dans le communiqué de presse de Fujifilm)

Si votre flash est concerné, et si vous avez un X-T1, X-T2 ou un X-Pro2, il faudra au préalable , appliquer la mise à jour du 21 mars 2017 du firmware de votre boitier, et faire seulement ensuite la mise à jour du frmware du flash EF-X500.


Si votre flash est concerné et si vous n'avez ni X-T1, ni X-T2 , ni X-Pro2
vous devrez alors contacter le support Fujifilm.
« Modifié: 21 mars, 2017, 17:56:01 pm par christal2 »

Publicité