[christal2]

29 janvier 2020.

Fujifilm vient de publier les mises à jour des versions de firmware pour les boitiers X-Pro3 et le X-T3


X-Pro3 Camera Body Firmware Update Ver.1.03
https://www.fujifilm.com/support/digital_cameras/software/firmware/x/xpro3/index.html


Detail of the update

The firmware update Ver.1.03 from Ver.1.01 and Ver.1.02 incorporates the following issues:

    1. The phenomenon is fixed that in rare cases, a freeze could occur.
    2. The phenomenon is fixed that the color tone of recorded images is not recorded correctly in AF-C mode and continuous shooting.

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

X-T3 Camera Body Firmware Update Ver.3.20
https://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt3/index.html

Detail of the update

The firmware update Ver.3.20 from Ver.3.10 incorporates the following issues:

    1. Enhanced autofocus.
    * Improving the tracking performance of the eye AF frame, making it easier to attain accurate autofocus on the eyes.
    * Improving face-detection performance when there are faces of different sizes within the same frame, making it easier to attain accurate autofocus.
    * Improving autofocus capability on a foreground subject even when there is a mixture of foreground and background subjects within a AF frame, causing the foreground subject to go out of focus, e.g. when shooting flowers against a busy background.
    2. Capability to save up to 9,999 pictures in each folder.
    Until now, the number of pictures that can be saved in a folder on an SD card was limited to 999. This update will raise the limit by ten times to 9,999 pictures.
    3. The phenomena below during a movie shooting are fixed.
    * Focus hunting at the minimum aperture.
    * A black line can sometimes appear on the bottom of the center.
    4. Fix of minor bugs.