ate Version Details
2007.08.02 1.16 1. Adjusted the exposure in bright-light shooting with a flash.
2. Modified the following display phenomena.
• If you playback a picture (3:2 or 1:1) enlarged, the location window in the right corner of the LCD may be out of alignment.
• If you assign FOCUS in the Fn button, and set to enable the STEP ZOOM, and if you switch a focus setting to the MF from the other focus settings with the Fn button, it may remain a number of zoom display on the zoom bar in the left of the LCD.
2007.05.29 1.14 1. Improved accuracy of the AF algorithm.
2. Modified the following display phenomena.
• If you switch between AF and MF with the Fn (Function) button, a part of the grid guide may disappear.
• If you turn a camera power with set to the [LANDSCAPE] in the SCENE mode, the message, 'Settings have been changed' will appear.
• If you use AAA type batteries in the Multi AF mode, even if you focus on the subject, a focus frame size will not change.
3. After you register the Spot AF in the MySettings, if you turn the Mode dial to change a setting, a focusing mode may change from the Spot AF to the Multi AF.
4. Found some errors in the shooting information in a DNG file, such as a value of the exposure compensation. Modified to record a DNG file correctly.
5. Modified the phenomenon that the skew correction feature may not work properly.
6. Revise a level of the image compensation in a long exposure.
2007.05.11 1.13 1. Modified the following phenomena.
• In RAW mode shooting, if a shutter speed is slower than 15 sec., a camera may fail to record an image properly.
• If you turn the camera power with the lens cap is attached to the lens, and then if you press the playback button, you will not operate a camera at all.
• After you change a mode, the step zoom setting may become OFF.
2. Improved stability the lens control at normal AF.
2007.05.02 1.12 Modified the following phenomena.
• If you register the Aperture priority mode (A mode) in the [My setting 2], a shutter speed will be fixed.
• With your setting the [SEQUENTIAL NO.] is ON, after a file number reached to "9999", the "File Number Over" message will appear and you will not able to take a picture any more.
[Note] You can see the current file number in the LCD (page 23 of the Camera User Guide), for the details of the [SEQUENTIAL NO.] is available in page 159 of the Camera User Guide.